Arcadian Blog — UHF
RFID Reader Antenna Basics - Gain and EIRP
Posted by Michael Crudele on
|
In the last blog, I maintained that the antenna is the most important part of a UHF RFID system. |
 |
RFID Reader Antenna Basics - Overcoming Fading with Antenna Diversity with Antenna Diversity
Posted by Michael Crudele on
|
RFID READER ANTENNA BASICS – OVERCOMING FADING WITH ANTENNA DIVERSITY |
|
RFID Reader Antenna Basics - The Wave® Antenna Solution
Posted by Michael Crudele on
|
RFID Reader Antenna Basics - The Wave® Antenna Solution |
|
RFID Reader Antenna Basics – Optimizing Tag Selection & Deployment
Posted by Michael Crudele on
|
RFID Reader Antenna Basics – Optimizing Tag Selection & Deployment |
 |
- 0 comment
- Tags: Antenna, Circularly Polarized, RFID, UHF
Voice Communications and M2M
Posted by Michael Crudele on
| What does machine to machine (M2M) mean and does this mean the antenna is not equipped for voice communications?
Machine to machine, or M2M, is an umbrella term used to describe all technology that exchanges information between one another and performs certain actions without the help of humans. |
Antenna that Works with BCD996XT Scanner
Posted by Michael Crudele on
Recently, we had a client reach out to us about part # WPD136M6C-001 in regards to setting up a BCD996XT scanner. They were looking to see if that specific antenna could be used with a base magnet or a bracket? Firstly, I’d like to start off by explaining that BCD996XT is capable of scanning a range of frequencies from 2 MHz to 1300 MHz (see below). Unfortunately, our antenna part WPD136M6C-001 only covers the VHF (136-174 MHz), UHF (380-520 MHz), and P25 (760-870 MHz), so depending on what channels you are looking to monitor, this may – or may not-...
- 0 comment
- Tags: Antenna, Antenna Mount, BCD996XT, BNC-Male, IP66, Magnetic Mount, Multi-Band, NMO Mount, P25, UHF, VHF, WPD136M6C-001